美国Kermetico HVAF+HVOF超音速火焰喷涂系统
Kermetico HVAF System Kermetico HVAF 高速火焰喷涂系统
|
Oxidant and coolant: Compressed Air. Pressure range 8-11.5 bar (115-165 PSIG).
氧化剂和冷却剂:压缩空气。压力范围:8-11.5 bar (115-165 PSIG)
Fuel: Propane, Propylene, Propane-Butane (LPG), or Natural Gas. Pressure: 7-11.5 bar (100-165 PSIG)
燃料:丙烷,丙烯。压力范围: 7-11.5 bar (100-165 PSIG)
Kermetico HVAF spray guns Kermetico HVAF 系列喷枪 |
Gun 喷枪 |
Description 描述 |
Max spray rate, per hour 最大喷涂效率, /小时 |
||
|
C7 |
Large parts with diameter >200 mm (8”) 适合喷直径 >200 mm (8”)大工件 |
33+ kg 72+ lbs. |
||
A powerful gun with the widest range of combustion chamber pressures and the coating quality on large surfaces. The lowest cost for large surfaces. Good protection against feedstock oxidation. C7为大功率喷枪,燃烧室的压力范围广,适用于大面积喷涂。大面积喷涂的成本低。为基体提供抗氧化保护。 |
|||||
C6 |
Universal carbide gun for parts Diameters 5-250 mm (0.2”-10”) 喷碳化物涂层专用喷枪,工件直径 5-250 mm (0.2”-10”) |
28 kg 62 lbs. |
|||
The gun designed to spray tungsten carbide on a wide spectrum of parts. 70% of AK7 power. AK6专门喷涂碳化钨涂层,喷涂工件范围广泛。功率是AK7的70%。 |
|||||
AK5 |
Miniature gun for smaller parts 适喷小工件的小型喷枪 |
15 kg 33 lbs. |
|||
Spraying metals, alloys, and carbides for parts <200 mm diameter, ID from 200 mm (8”) up, thin walls, complex surfaces. 适合在直径 <200 mm的小工件、内径大于200 mm (8”)的内孔 、薄壁、异形件上喷涂金属、合金和碳化物涂层。 |
|||||
|
AK-HH |
Manual HVAF spraying of complex surfaces 用以喷涂复杂表面的手持喷枪 |
15 kg 33 lbs. |
||
The universal hand-held gun is supplied with a robot mounting fixture. Used for spraying metals, alloys, and carbides. Gun weight: 2.5 kg 多功能手持喷枪配有机械手固定装置。用以喷涂金属、合金和碳化物涂层。枪体重量:2.5kg |
|||||
|
AK-ID
AK-IDR |
Internal diameters minimum 100 mm (4”) 适合最小内径 100 mm (4”)内孔喷涂 Rotating head, minimum diameter 100 mm (4”) 旋转枪头,适合最小内径 100 mm (4”)内孔喷涂 |
5 kg 11 lbs. |
||
Air cooling provides hours of continuous ID operation. Spray angle 90°. 空气冷却可保证持续进行数小时的内孔喷涂。喷涂角度 90°。 |
Each gun, except for our ID guns, may be configured to Ultra (highest velocity), Economy (highest DE), or Balanced mode and they may be used in blast & spray mode.
除ID内孔喷枪以外,每款喷枪都有三种模式可以选择设定:Ultra(速度优先),Economy经济(沉积效率优先),或Balanced 均衡模式,它们均可用以喷砂和喷涂。
The Kermetico HVAF System Kermetico HVAF 高速火焰喷涂系统 |
Kermetico 公司的HVAF C 系统因为采用的是压缩与丙烷燃烧,所以具有较高的喷涂效率,质量偏差小,操作成本低等特点。加入氧气之后,又具有了HVOF设备的一些特点。
WC/Co/Cr 86/10/4 coating Feature WC/Co/Cr 86/10/4 涂层特征 |
Typical HVOF 一般HVOF |
Kermetico HVAF gun setup Kermetico HVAF喷枪设定模式 |
||
Economy 经济 |
Balanced 均衡 |
Ultra-quality 优质 |
||
Hardness 硬度, HV300 |
1050-1250 |
1050-1250 |
1320-1350 |
>1450 |
Apparent metallographic porosity 显像金相孔隙率 |
<0.8 |
<0.8 |
<0.5 |
<0.3 |
Bond strength (@0.040” thickness), PSI 结合强度 (@0.040” 厚), PSI |
+12,000 |
|||
Range of as-sprayed roughness, µm (µ in.) 喷后未加工粗糙度范围,µm (µ in.) |
3.5-4.5 (150-180) |
1-3.2 (40-130) |
||
Maximum coating thickness, mm (inch) 最大涂层厚度,mm (inch) |
12.7 (0.5) |
12.7 (0.5) |
3 (0.12) |
1.5 (0.06) |
Kermetico C is used to deposit Ag, Al, Cu, Sn, Ti and other powder materials .
Kermetico公司的C系统适合用来喷涂Ag, Al, Cu, Sn, Ti 和其他粉材。
Kermetico Control Consoles and Powder Feeders Kermetico控制柜和送粉器 |
Rated Tablet + PLC Controller;
工业平板电脑+ PLC控制柜;
Large number of stored programs;
可大量存储程序;
One system fits guns;
系统兼容喷枪;
Variety of powder feeders and gas vaporizers;
送粉器和汽化器多种型号可选;
Custom-made systems and guns by request;
可按客户需要定制系统和喷枪;
And more.
更多...
始于2006年,Kermetico公司开始致力于HVAF工艺和设备的研发。多年的科研成果让我们的热喷涂设备制备出适合的工业涂层。现已有超过60余套Kermetico HVAF系统在全球范围内运行。Kermetico的所有设备均在美国加利福尼亚州设计和制造。
Visit our website or our job shop to learn more about Kermetico`s coating quality and equipment.//
欢迎访问我们的网站或工厂以了解更多Kermetico的涂层和设备。
亚洲区客户可联系Kermetico公司授权经销商——北京东方润鹏科技有限公司 谢谢!
* Multiple scientific papers and case studies supporting this info will be provided by request.
如需此方面的更多科技论文和研究案例的论证,敬请联系我们。